Advertisement
Beam Privacy Panel
T-BRACKETS
x2
PRIVACY PANEL
ADAPTER
x2
Tools Needed (Not Included)
· PHILLIPS HEAD SCREWDRIVER
· TAPE MEASURE
PRIVACY PANEL
x1
#10x1" PHILLIPS
HEAD SCREW
x4
1
Lower the privacy panel adapters into the top center channel of the Beam. To ensure the adapters are
placed properly for the panel, use a tape measure to confirm that the gap between the leg and the
adapter is 5 ¾".
Assembles in
Minutes
5 ¾"
5 ¾"
5 ¾"
5 ¾"
5 ¾"
5 ¾"
Advertisement
Table of Contents
Related Manuals for Vari Beam Privacy Panel 72
Summary of Contents for Vari Beam Privacy Panel 72
- Page 1 Beam Privacy Panel Assembles in Minutes PRIVACY PANEL T-BRACKETS 5 ¾" 5 ¾" 5 ¾" 5 ¾" 5 ¾" 5 ¾" PRIVACY PANEL #10x1" PHILLIPS ADAPTER HEAD SCREW Tools Needed (Not Included) Lower the privacy panel adapters into the top center channel of the Beam. To ensure the adapters are placed properly for the panel, use a tape measure to confirm that the gap between the leg and the ·...
- Page 2 NOTE: Ensure the T-brackets are vertical second T-bracket, adapter, and remaining screws. and perpendicular to the Beam. If they are not, loosen the screws and adjust as needed. Patent and trademark information: vari.com/patents (800) 207-2587 ©2022 Varidesk, LLC All rights reserved.
Need help?
Do you have a question about the Beam Privacy Panel 72 and is the answer not in the manual?
Questions and answers