Precor Energy Series Service Manual page 20

of the incline potentiometer. If the three measurements are now correct the problem is in the
cable from the incline potentiometer to the lower PCA. The cable may be repairable. If the
cable cannot be repaired, replace the incline motor.
10. If the measurements in step 16 are remains significantly incorrect, replace the incline motor.
11. If you have performed all of the procedures above and have been unable to correct the
problem, call Precor customer support.
©2014 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page
Page 20
of 5420
Page 20