Ecler Dante VIDA-24Q User Manual
Hide thumbs
Also See for Dante VIDA-24Q:
- User manual (24 pages) ,
- User manual (151 pages) ,
- User manual (159 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ecler Dante VIDA-24Q
Summary of Contents for Ecler Dante VIDA-24Q
- Page 1 VIDA-24Q AMPLIFIERS Digital Amplifiers USER MANUAL 50-0429-0100 VIDA-24Q...
-
Page 2: Table Of Contents
TABLE OF CONTENTS PRECAUTIONS ........................3 Important Remark ..........................3 Important Safety Instructions ......................4 Cleaning ..............................4 PACKAGE CONTENTS ......................5 DESCRIPTION and FEATURES ................... 5 Main Features ............................6 INSTALL & CONNECT ......................6 Location, Assembly and Ventilation .................... 7 Mains Connection .......................... -
Page 3: Precautions
1. PRECAUTIONS 1.1 IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. -
Page 4: Important Safety Instructions
1.2 IMPORTANT SAFETY INSTRUCTIONS Read these instructions. 12. Unplug the device during lightening sorts or when unused for long periods Keep these instructions. of time. Heed all warnings. Refer servicing qualified Follow all instructions. personnel. Servicing is required when Do not use this device near water. the device has been damaged in any Clean only with dry cloth. -
Page 5: Package Contents
VIDA-24Q is a 2400W digital amplifier, with 4 amplified outputs that can be independently configured in high (100/70V) or low (8/4/2ohm) impedance. The VersaPower technology, developed by Ecler, allows an asymmetrical power distribution, and thanks to the Smart VersaPower tool it helps installers by facilitating a smart and fast configuration. -
Page 6: Main Features
• Control and scheduled slot audio player. events for automation. VersaPower is the amplification technology, developed by Ecler, that allows asymmetrical power distribution among amplified outputs, independent of load. Smart Versapower is the tool that allows automatic gain and sensitivity adjustment, to distribute in an easy and quick way, the total power among the amplified outputs. -
Page 7: Location, Assembly And Ventilation
4.1 LOCATION, ASSEMBLY AND VENTILATION Vida series devices have a 19" rack format (2RU). It is very important not to enclose the amplifier or expose it to extreme temperatures as it generates heat. It is also necessary to promote the passage of fresh air through the ventilation holes of the chassis. -
Page 8: Analogue Input Connections
Please refer to the web application manual (available soon) for more information on www.ecler.com. Signal input connectors are 3 position screw terminal block. The wiring is: Live or direct signal >... -
Page 9: Digital Audio Inputs And Outputs
4.5 DIGITAL AUDIO INPUTS AND OUTPUTS VIDA allows the reception of 4 channels of digital audio DANTE™ and the sending of 4 channels of digital audio DANTE™ through an Ethernet network compatible with the transport of digital audio over IP through the DANTE™ protocol. The routing of the digital audio signals DANTE™... -
Page 10: Operation Example
4.6.2 OPERATION EXAMPLE AMP OUT1: HIZ-100V AMP OUT2: HIZ-70V When HIZ is selected, 2ohm switch has no effect. AMP OUT3: LOZ-8ohm AMP OUT4: LOZ-2ohm When LOZ is selected, and 2ohm switch is in 2ohm position (down), switch 4/8ohm has no effect. The connection cable that joins the amplifiers outputs and the loudspeakers must be of good quality, sufficient section and as short as possible. -
Page 11: Gpi Ports
• Up to 16 remote control ports can be connected in parallel to the same hardware control potentiometer. Ground connections of all devices those ports belong to must be joined. • The connection cables can be up to 500m long if a section of 0.5mm is used. • Consult the available accessories at www.ecler.com... -
Page 12: Gpo Ports
4.9 GPO PORTS VIDA has on its rear panel 4, relay outputs NO / NC (normally open / normally closed). Each of these outputs can have its status change associated with a user preset by means of a specific function programmed through VIDA web application, such as a calendar event or the touch of a key available on a user panel. -
Page 13: Ethernet Ports
4.11 ETHERNET PORTS The RJ-45-type ETHERNET connectors on the rear panel, named NET1 and NET2, allows the equipment to be connected to an Ethernet network, or directly to a computer or other device with an Ethernet interface, point-to-point. This connection enables, within a local network, the following: •... -
Page 14: Start-Up And Operation
5. START-UP and OPERATION 5.1 START UP When the rear panel Power switch is pressed, the amplifier is powered and can be switched on, briefly holding the front ON/SLEEP button or remotely from the VIDA web application or with the NET protocol. In a complete audio installation, it is important to start up the equipment in the following sequence: 1. -
Page 15: Panel Functions
6. PANEL FUNCTIONS 6.1 FRONT PANEL Control knobs, KNOB1-4 Limit indicator LED On/Sleep Button Thermal indicator LED Signal indicator LED Dante™ indicator LED Clip indicator LED Data indicator LED Protection indicator LED On/Sleep indicator LED Standby/mute indicator LED 6.2 REAR PANEL Power switch GPO ports, GPO1-4 Mains socket base... -
Page 16: Technical Data
7. TECHNICAL DATA 7.1 TECHNICAL SPECIFICATIONS VIDA-24Q INPUTS Number of Inputs 4 analogue input channels 4 DANTE™ Network Rx channels 1 embedded player, 1 embedded signal generator Analogue input connection type IN1-4: 3-pin Euroblock, balanced, pitch 3,5 mm. Digital input connection type Ethernet, managed via Dante™... - Page 17 SIGNAL Voltage gain 28 to 40 dBV 30,2 to 42,2 dBu Input sensitivity -6 to +6 dBV -3,78 to 8,2 dBu 0,5 to 2 Vrms (adjusted by means of Smart Versa Power utility) Input impedance >24k (balanced) Max input level +18 dBV +20,2 dBu (@ Gain 34 dBV)
- Page 18 POWER & HEAT @120VAC 1/4 POWER, @ 4Ω (all channels driven) Power 855 W | 865 VA Current Draw 7,37 Arms Thermal Loss 227,9kcal/h | 904,4BTU/h 1/8 POWER, @ 4Ω (all channels driven) Power 483 W | 493 VA Current Draw 4,16 Arms Thermal Loss 115,2kcal/h | 457,3BTU/h...
- Page 19 REMOTE CONTROL CONNECTIONS ON / OFF GPIs x4 GPIs (0-10V) Function and settings by embeded web application 5-pin Euroblock connector, rear panel. Euroblock pitch 3,5 GPOs x4 NC / NO contacts 4x 3pins Euroblock connector, rear panel Euroblock pitch 3,5 mm External MUTE Yes, contact (2 pins Euroblock connector, rear panel, Euroblock pitch 3,5 mm)
- Page 20 DIGITAL ENGINE Processor Quad core 64bits 1,5GHz AUDIO CONVERTERS Sampling rate 48 kHz Resolution 24 bit Dynamic range 114dB PROCESSING Digital processing 32/64 bit Latency 2,8 ms (Analog IN to analog OUT) Inputs processing Parametric EQ (Settings by embeded web application) Outputs processing Delay, Parametric EQ, Graphic EQ independent for every amp out and aux out.
-
Page 21: Mechanical Diagram
Included accessories Universal Main cords, Euroblock Connectors (inputs /outputs), Desktop feet, rack 19" installation hardware Optional accessories Dimensions (WxHxD) 482.6 x 88 x 410 mm. / 19 x 3.46 x 16.14 inches Weight 9.3 kg / 20.5 lb Shipping dimensions (WxHxD) 650 x 125 x 600 mm. - Page 23 NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. For technical queries contact your supplier, distributor or complete the contact form on our website, Support / Technical requests. Motors, 166‐168 -08038 Barcelona ‐ Spain‐(+34) 932238403 information@ecler.com www.ecler.com...