Related Manuals for Ecler VEO-SPH44
Summary of Contents for Ecler VEO-SPH44
- Page 1 VEO-SPH44 DISTRIBUTION AMPLIFIER / SPLITTER 1x4 HDMI 2.0 Distribution Amplifier / Splitter USER MANUAL...
-
Page 2: Table Of Contents
INDEX IMPORTANT REMARK ......................3 IMPORTANT SAFETY INSTRUCTIONS ................3 IMPORTANT NOTE ........................ 5 INTRODUCTION ........................5 PACKAGE CONTENTS ......................5 PANEL DESCRIPTION ......................6 CONNECTION AND INSTALLATION ................. 7 APPLICATION DIAGRAM ..................... 7 TECHNICAL SPECIFICATIONS .................... 8... -
Page 3: Important Remark
1. IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. - Page 4 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
-
Page 5: Important Note
HDR formats and HDMI data rate up to 18Gbps at 4K/UHD@60Hz video resolution with 4:4:4 chroma sampling. It includes EDID management in three different modes and it is HDCP 2.2 compliant. VEO-SPH44 guarantees seamless integration for all applications that require latest 4K/UHD and HDR sources and displays. -
Page 6: Panel Description
Out4, in order to ensure compatibility between all displays. 5. EDID Function Switch: Auto mode EDID information is managed by VEO-SPH44 as listed in table in paragraph 7. 6. EDID Function Switch: Copy mode In this mode displays connected to Out1-3 will receive a copy of the EDID information negotiated by Out4. -
Page 7: Connection And Installation
7. CONNECTION AND INSTALLATION 1. Connect HDMI signal source (such as PC, Blu-ray player, etc) to VEO-SPH44 HDMI input port. 2. Connect VEO-SPH44 HDMI output ports to displays. 3. Power up VEO-SPH44, displays and sources. Note: HDCP version is prior to EDID: 4K@60Hz EDID settings will be accepted only if displays are HDCP 2.2 compliant, otherwise output will be automatically set to... -
Page 8: Technical Specifications
48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bitrate up to 24-bit HDMI Distance up to 10 meters (33 feet) with Ecler VEO cables Operating Temperature -5 to +40°C (+41 to +104°F) Humidity 5 - 90% RH (no condensation) Power Consumption 2W Maximum... - Page 9 NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com www.ecler.com...