Related Manuals for Ecler VEO-SPH48
Summary of Contents for Ecler VEO-SPH48
- Page 1 VEO-SPH48 DISTRIBUTION AMPLIFIER / SPLITTER 1x8 HDMI 2.0 Distribution Amplifier / Splitter USER MANUAL...
-
Page 2: Table Of Contents
INDEX IMPORTANT REMARK ......................3 IMPORTANT SAFETY INSTRUCTIONS ................3 IMPORTANT NOTE ........................ 5 PACKAGE CONTENTS ......................5 PANEL DESCRIPTION ......................6 CONNECTION AND INSTALLATION ................. 7 APPLICATION DIAGRAM ..................... 7 TECHNICAL SPECIFICATIONS .................... 8... -
Page 3: Important Remark
1. IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. - Page 4 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
-
Page 5: Important Note
The VEO- SPH42 comes with a 3-year warranty. INTRODUCTION Ecler VEO-SPH48 is a professional 1x8 HDMI 2.0 distribution amplifier/splitter. It supports HDR formats and HDMI data rate up to 18Gbps, including 4K/UHD@60Hz video resolution with 4:4:4 chroma sampling. It includes EDID management in three different modes and it is HDCP 2.2 compliant. -
Page 6: Panel Description
Out8, in order to ensure compatibility between all displays. 4. EDID Function Switch: Auto mode EDID information is managed by VEO-SPH48 as reported in table in paragraph 5. EDID Function Switch: Copy mode In this mode, when Out8 is connected to display, the displays connected to Out7-1 will receive a copy of the EDID information negotiated by Out8. -
Page 7: Connection And Installation
7. CONNECTION AND INSTALLATION 1. Connect HDMI signal source (such as PC, Blu-ray player, etc) to VEO-SPH48 HDMI input port. 2. Connect VEO-SPH48 HDMI output ports to displays. 3. Power up VEO-SPH48, displays and sources. Note: HDCP version is prior to EDID: 4K@60Hz EDID settings will be accepted only if displays are HDCP 2.2 compliant, otherwise output will be automatically set to... -
Page 8: Technical Specifications
48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bitrate up to 24-bit HDMI Distance up to 10 meters (33 feet) with Ecler VEO cables Operating Temperature -5 to +40°C (+41 to +104°F) Humidity 5 - 90% RH (no condensation) Power Consumption 5W Maximum... - Page 9 NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 | information@ecler.com www.ecler.com...