Sam4s ER-900 Series Service Manual page 25

3-3 Installation
3-3-3 Paper Roll Installation (2-Station)
1. Remove the cover printer.(Fig 3-4(A))
2. Push up the green lever toward and then lift up to open the receipt paper cover. (Fig 3-4(B))
3. Ensure that the paper is being fed from the bottom of the roll. (Fig 3-4(C))
4. Close the paper cover slowly until it locks firmly.(Fig 3-4(D))
5. Passing the leading edge of the paper through the cutter slot.
Tear off the excess paper.(Fig 3-4(E))
6. Push up the green lever toward and then lift up to open the journal paper cover. (Fig 3-4(F))
7. Ensure that the paper is being fed from the bottom of the roll. (Fig 3-4(G))
8. Close the printer cover slowly until it locks firmly. (Fig 3-4(H))
SAM4S ER-900/SPS-300 SERIES
All manuals and user guides at all-guides.com
3 Installation and Operation
3-5