Product Specifications; General Specifications - Sam4s ER-900 Series Service Manual

2 Product Specifications

[ SPS-300 PART ]
Specifications are correct at the time of printing.
Product specifications are subject to change without notice. See below for product specifications.

2-1 General Specifications

Item
Processor • LPC2470 (NXP)
• PGM
Memory
• DATA
• Type
• Charging Time
Battery
• Life
• 90 Days
Data Storage
• Flow Control :
① DTR / DSR
Interface Serial
② XON / XOFF
(RS-232C)
• Baud Rate
• Voltage Supply
• 10/100 base-T
LAN
ETHERNET(16REG_MAX)
• 1-Slot [option]
SD CARD
• 1-Slot [option]
MSR
DRAWER • 2-PORT [Default (internal) #1 / Option(RJ-11) #2]
• Magnetic [Option]
i-BUTTON/Addmat
• 1-Port [Device, Option]
USB
• Model
Printer
• Printing Speed
• Type
Auto Cutter
• Cutting Method
• Operator Display
Display
• Customer Display
• Flat Key
Key Board
• Raised Key
• Approx. 33W (Peak)
Power Consumption
Power Requirement • AC 120V/60Hz, AC 230V/50Hz
• Temperature
Environment
Condition
• humidity
• Approximately 12Kg (Net), with G-Drawer
Weight
• 400(W) × 450(L) × 300(H) : With G-Drawer
Dimensions(mm)
SAM4S ER-900/SPS-300 SERIES
All manuals and user guides at all-guides.com
Description
: FLASH 16Mbits
: SRAM 16Mbits
: Lithium, 3V 65mAh
: 24 Hours
: 3 Years
: H/W Flow Control
: S/W Flow Control
: 1200/2400/9600/19200/38400/57600/115200 Bps
: VCC(+5V/1A) supplies at RS-232C#1~#4
: LTPD245/CAPD245 (SII)
: 85mm / Sec
: Guillotine
: 1 Point Partial Cutting
: 192x64 Graphic 6-Color B/L LCD
: '9' Digits LED
: 150 Key
: 91Key(98key:Option) / 63Key
: 0℃ ~ 45℃
: 30% ~ 80% RH
Table2-1 General Specifications(SPS-300)
Remark
When battery is Full
charged
RS-232C #1(DSUB-9)
RS-232C #2(DSUB-9)
RS-232C #3(RJ45)
RS-232C #4(RJ45)
[Option]: RS-232C #3,#4
Detail Spec refer to Next
Page
OPTION
Set Size
2-1