Section 5
This section describes the operation of the mast system. Be sure to read and understand the
entire operation procedure and Safety Summary (Section 1) before beginning operation.
5.1 Pre-Operation Check
Before operating the mast system, ensure:
•
All operators read and understand the entire operation procedure and are properly
trained.
•
The mast system is undamaged. If damage is apparent, do not use the mast system,
and have it serviced prior to use.
•
The area is free of power lines or other overhead obstructions. The mast system location
should be no closer than a horizontal distance equal to the extended height of the mast
away from power lines.
•
Any objects that might obstruct motion of the mast system, cause binding, or hinder
mast system function are removed.
•
The mast system and payload are properly installed. The mast should be plumb.
•
When using a vehicle, the vehicle is not moving and is on level terrain.
•
Any transit tie-downs have been removed.
•
The mast system area is free of personnel.
•
The operator has full view of the mast system during use.
Check with The Will-Burt Company's Engineering for additional wind information for customer-
specific loading scenarios.
5.2 Operation Equipment
Table 5-1 lists recommended equipment for operation.
Personal Protective*
Safety Glasses
Hearing Protection
*Depending on the national and local standards and codes of practice, and the environment, additional personal
protective equipment may be necessary.
TP-5928001-C
February 2023
Operation
Table 5-1 Equipment Recommended for Operation
Recommended Equipment
Work Gloves
Hard Hat or Helmet
H
-U
® M
O
URRY
P
AST
PERATOR
Nitrile or Vinyl Gloves
Safety Shoes
'
M
S
ANUAL
5-1