Package Management; System Start-Up - Wieland WIENET AP User Manual

8.24

Package management

The Package management menu item in the System menu gives you the option of viewing packages
that are available, installed or that can be updated. Click on the relevant buttons Available, Installed
or Updates. You can filter within these categories by entering what you're searching for in the Filter
field. You also have the option of installing additional packages. Use the Download and install pack-
ages field to do this. If more packages are displayed than fit on one page, you can use the two large
buttons "<<" and ">>" to navigate to the other pages.
Fig. 68: Package management
8.25

System start-up

If you want to configure the scripts that are executed when the device starts up, go to the System
startup menu item in the Menu.
Disabling essential startup scripts such as "network" may render the device inaccessible.
NOTE
Click Enabled to disable a startup script. This field then changes to Disabled.
Fig. 69: System start-up
You can also add your own commands under Local start script, which are then executed at the end
of the boot process.
Wieland Electric GmbH | BA001098 | 12/2022 (Rev. C)
Web interface of the access point
57