General Information - Watts WFHC 06Z 02 HC RF 24 User Manual

GB
Water Floor controller. Wiireless solution. 6 zones and 10 zones. 24V and 230V
B
1.

GENERAL INFORMATION

1.1 Safety warnings and operating instructions
This product should be installed preferably by a qualified professional. Subject to observation of the above terms, the
manufacturer shall assume the liability for the equipment as provided by legal stipulations.
All instructions in this Installation & Operation manual should be observed when working with the controller. Failures due to
improper installation, improper use or poor maintenance are voiding manufacturer liability.
Any attempt to repair voids the responsibility and the obligation to guarantee and replacement from the manufacturer.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling,return this product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For more information see:
Application
1.2 Application
The controller has been designed for use in residential rooms, office spaces and industrial facilities. Verify that the installation
complies with existing regulations before operation to ensure proper use of the installation.
2. PRESENTATION
The Connecting box WFC HC RF is especially designed to control your Under Floor Heating and Cooling system. It
allows easy and quick connection of thermostats and actuators.
4 versions are available:
6 zones
10 zones
2.1 Functions
It has integrated multiple functions:
Wall mounted or mounter on DIN Rail
•
Push-in cable connections with strain relief
•
LED status indication and DIP switch for device setting
•
Manage 6 or 10 zones with 2 actuators per zone
•
• Easy merging of the zones on the same thermostat
• Multiple systems configuration
• H&C input (230V and volt free signal)
Water temperature measurement (Probe not supplied) for humidity detection
•
Pump or boiler output (230V and volt free signal)
•
Anti-Grip management
•
Overheating security
•
Internal RF antenna, optional external antenna
•
Work with NC and NO actuators
•
USB connectivity for software update and data log
•
2.2 Box content
230 V version
WFHC 06Z 02 HC RF 230
WFHC 10Z 02 HC RF 230
www.recyclethis.info
24V Version
WFHC 06Z 02 HC RF 24 (Require
external 230V/24V transformer:
TRF02 230/24)
WFHC 10Z 02 HC RF 24 (Require
external 230V/24V transformer:
TRF02 230/24)
3