Watts WFHC 06Z 02 HC RF 24 User Manual page 12

Device 1: Main Controller
By pressing for 5 seconds, the
controller goes in RF pairing menu.
By using and select zone 3
(Red led), press to enter in
Pairing with a slave device mode.
All LEDs are blinking red.
5.2 System configuration with central unit
The central unit centralizes the communication between controllers.
WFHC HCM 02 RF 230 (Option)
WFHC 02 HC RF
Device 1: WFC H/C RF
By pressing for 5 seconds, the
controller goes in RF pairing menu.
By using and select zone 2
(Red led), press to enter in
Pairing with a master device mode.
All LEDs are blinking red.
Device 2: Sub-controller
By pressing for 5 seconds, the
controller goes in RF pairing menu.
Bu using and select zone 2
(Red led), press to enter in
Pairing with a master device mode.
All LEDs are blinking red.
BT-D03 RF
WFHC 02 HC RF
WFHC 02 HC RF
Device 2: BT-CT02 RF
Put the device in RF pairing mode.
Select the first room.
12
Remarks
When RF pairing is done, both WFC
H/C return to normal mode.
BT-WR02 RF (Option)
BT-A03 RF
WFHC 02 HC RF
Remarks
When RF pairing is done, both WFHC
02 HC RF
and BT-CT02 RF exits the pairing
mode.
BT-CT02 RF