Watts WFHC 06Z 02 HC RF 24 User Manual page 10

5. System configuration
5.1 System configuration without central unit
5.1.1 Standalone installation
Only one controller or multiple controllers without interconnection
WFHC HCM 02 RF 230 (Option)
Device 1
By pressing for 5 seconds, the
controller goes in RF pairing menu.
Bu using and select zone 1
(Red led), press to enter in
Pairing with thermostat mode.
Choose the channels with
Select/deselect the zone with
Cursor is blinking green (Zone LED).
Selected zone is fix red.
Already paired zone is fix green.
By pressing for 5 seconds, the
controller goes in RF pairing menu.
Bu using and select zone 3
(Red led), press to enter in
Pairing with a slave device mode.
All LEDs are blinking red.
Device 2
Thermostats :
Put product in RF pairung mode (refer
to corresponding instruction manual)
and .
.
Put the device in RF pairing mode.
BT-D03 RF
WFHC 02 HC RF
BT-WR02 RF (Option)
Remarks
If RF pairing is done, the leds of the
channels selected on the WFHC 02
HC RF must turn Green and the
thermostats must exit the pairing
mode.
Exit of the controller pairing menu:
Long press on
When link is done WFHC 02 HC RF
and WFHC HCM 02 RF 230 return to
normal mode.
REMARK: only one WFHC HCM 02
RF 230 per installation
10
BT-A03 RF