7
Installation
7.1
Safety instructions
Before installing and commissioning the TwinSAFE components please read the safety instructions in the
foreword of this documentation.
7.2
Transport / storage
For transport and storage of the TwinSAFE components, use the original packaging in which the
components were delivered.
Note the specified environmental conditions
Ensure that the digital TwinSAFE components are only transported and stored under the specified ambient
conditions. The ambient conditions can be found in the technical data.
Incorrect transport or storage can damage the TwinSAFE components. Never use damaged TwinSAFE
components. Dispose of the affected product.
7.3
Mechanical installation
Only work on TwinSAFE components when they are de-energized
The Bus Terminal system is live. Set the Bus Terminal system to a safe, de-energized state before you
start mounting, dismounting or wiring the TwinSAFE components.
If you work on the TwinSAFE components while the Bus Terminal system is live, you may be injured by
electric shock. In addition, the device may be damaged.
EK1914
CAUTION
WARNING
Version: 2.0.0
Installation
25