Configuration Of The Ek1914 For Safety Switching Mats - Beckhoff EK1914 Operating Manual

Configuration of the EK1914 in TwinCAT
8.3.2

Configuration of the EK1914 for safety switching mats

The EK1914 also supports the direct connection of safety switching mats.
Parameter
To connect these safety mats please set the following parameters for the EK1914 in the TwinCAT System
Manager:
• Connect the two sensor signals to channels 1 and 2 and activate the entry short cut channel x/y is no
module fault for both the inputs used under the parameter Logic for channel 1 and 2.
• Switch the sensor test of the EK1914 to true for both the inputs used
48 Version: 2.0.0 EK1914