Entering A Twinsafe Address And Parameters In The System Manager; Fig. 22 Parameters Of The Ek1914 - Beckhoff EK1914 Operating Manual

Configuration of the EK1914 in TwinCAT
8.3 Entering a TwinSAFE address and parameters in the
System Manager
The TwinSAFE address set using the DIP switch must also be set on the Safe Parameter tab (FSoE Address
entry) underneath the EK1914. The parameters for the safe inputs and outputs can also be set here.
Fig. 22: Parameters of the EK1914
The parameter settings of the EK1914 can also be set under the respective TwinSAFE connection on the
Connection and Safe Parameter tabs.
44 Version: 2.0.0 EK1914