Operation; Environmental Conditions; Installation; Safety Instructions - Beckhoff EL2912 Operating Instructions Manual

Operation

5 Operation
5.1

Environmental conditions

Please ensure that the TwinSAFE components are only transported, stored and operated under the specified
conditions (see technical data)!
Risk of injury!
The TwinSAFE components must not be used under the following operating conditions.
• under the influence of ionizing radiation (that exceeds the level of the natural environmental radiation)
• in corrosive environments
• in an environment that leads to unacceptable soiling of the TwinSAFE component
Electromagnetic compatibility
The TwinSAFE components comply with the current standards on electromagnetic compatibility with regard
to spurious radiation and immunity to interference in particular.
However, in cases where devices such as mobile phones, radio equipment, transmitters or high-frequency
systems that exceed the interference emissions limits specified in the standards are operated near
TwinSAFE components, the function of the TwinSAFE components may be impaired.
5.2

Installation

5.2.1

Safety instructions

Before installing and commissioning the TwinSAFE components please read the safety instructions in the
foreword of this documentation.
5.2.2

Transport / storage

Use the original packaging in which the components were delivered for transporting and storing the
TwinSAFE components.
Note the specified environmental conditions
Please ensure that the digital TwinSAFE components are only transported and stored under the specified
environmental conditions (see technical data).
5.2.3

Mechanical installation

Risk of injury!
Bring the bus system into a safe, de-energized state before starting installation, disassembly or wiring of
the devices!
28
WARNING
NOTE
CAUTION
WARNING
Version: 2.0.0 EL2912 and EL2912-2200