Angelo Decor AD92044 Assembly Instructions

Fairy House Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all parts.
To prevent the risk of water loss, create
a drip loop with the cables from the
lights before they exit out the back of
the fountain.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate and attach the pre-installed
tubing to the output of the pump.
Place the pump inside the reservoir.
Locate the cable from the light inside
the fountain. Attach the cable light to
the cable from the pump by using the
threaded connector. Repeat this
process for both lights.
AD92044
Printed in China