Angelo Decor AD92035 Quick Start Manual

Timber Trail Fountain
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Arrange all parts in your work area. Arrange all parts in your work area.
Place the bird on the fountain as shown
above.
The final assembly should look
like this
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Locate the tubing from inside the Locate the tubing from inside the
fountain and connect it to the fountain and connect it to the
pump. Adjust the flow control as pump. Adjust the flow control as
needed. needed.
AD92035
Place the pump inside the Place the pump inside the
reservoir as shown. reservoir as shown.