Sony DSC-1024HD Instructions Manual page 17

Resetting the data to the factory preset levels
There are three options for resetting the adjustment data to the
factory preset levels.
GEOM RESET: Resets ZOOM, H/V SIZE and H/V CENT
currently in use.
COLOR RESET: Resets CONTRAST, PHASE and CHROMA
currently in use.
ALL RESET: Resets all user adjustment items to the factory
preset data and clears the memory contents.
The operation procedures are the same for the three options.
Press the MENU button.
1
The MENU 1 screen appears.
MENU
2 Press the CENT button to move the cursor
GEOM RESET, COLOR RESET or ALL RESET, and press the
ENTER button.
ENTER
CENT
3 Press the CENT
button to move the cursor to
EXECUTE, and press the ENTER button.
The adjustment data are reset to the factory preset levels.
To cancel resetting
Press the MENU button, or select CANCEL in step 3 above and
press the ENTER button.
You can use the built-in test patterns to adjust the monitor or
projector screen.
Press the TEST PATTERN button.
Each time you press TEST PATTERN, the following test
patterns appear in sequence.
to
Box Color bar Gray scale
Hatch
Hatch
The selected test pattern name is displayed on the screen for
about 3 seconds.
To restore the normal screen
Press the TEST PATTERN button repeatedly until no test
pattern is displayed. Pressing the ON/OFF switch, INPUT
SELECT buttons or OUTPUT FORMAT button also restores
the normal screen.
When the test pattern is displayed, only the ON/OFF switch,
and the INPUT SELECT, OUTPUT FORMAT, MENU and
CENT
TEST PATTERN button
buttons will function.
OFF (input signal)
Example: Hatch
41