Sony DSC-1024HD Instructions Manual page 19

When multiple pieces of Sony equipment are connected via the
CTRL S jack, you can operate a specific piece of equipment by
assigning the index number preset for each piece of equipment
on the converter, and then on the remote commander.
For presetting the index number on each piece of equipment,
refer to the Instruction Manual of the equipment.
The following explanation is an example of use of the RM-854
remote commander.
Assigning the index number on the converter
1 Press the MENU button once.
The MENU 1 screen appears.
MENU
2
Press the CENT button to move the cursor
INDEX NO. and press the ENTER button.
The INDEX NO. screen appears.
ENTER
CENT
3 Press the CENT button repeatedly to select the
index number (1 to 255) of the equipment you want to
control, and press the ENTER button.
4 To quit the menu, press the MENU button three times.
Remote signal
CTRL S OUT
Remote
commander
to
CTRL S IN
CTRL S OUT
CTRL S IN
Operating the equipment with the RM-8S4 remote
commander
1 Press the ID MODE ON button on the remote
commander.
The index numbers appear on all the pieces of equipment
including the converter.
2 Input the index number of the equipment you want to
operate using 0-9 buttons of the remote commander.
The input number appears right next to each equipment
own index number.
3 Press the ID MODE SET button.
The character on the selected equipment changes to cyan
while others change to red.
Now you can operate only a specified equipment (All
operations available in ID mode except POWER ON/OFF).
43