Overview; Technical Data; Performance Data; Notes On Safety - Parkside PTPS 1100 B2 Translation Of The Original Instructions

Overview

1 Handle
2 Power cord
3 Float switch cable
4 Float switch height grid
5 Holder, float switch height
adjustment
6 Float switch
7 Pump foot
8 Pump outlet
9 Pump housing
10 Quick-connect adapter
11 Angle adapter with
quick-connect connector
12 Reducer piece
13 Nylon traction rope

Technical Data

Dirt Water
Submersible Pump ...............PTPS 1100 B2
Rated voltage
(U) .... 230 V~ (Alternating current), 50 Hz
Rated power input/
Power consumption (P) ............... 1100 W
Max. discharge rate (Q max) .. 20000 l/h
Max. discharge head (H max) ........... 9 m
Max. depth of immersion .................. 7 m
Max. water temperature (T max) ..... 35 °C
Hose connection........................1", 1 ¼",
Tap connection with internal thread
on the angle adaptor ... G 1 ½" (47,8 mm)
on the hose adaptor. ....... G 1" (33,3 mm)
Max. foreign body size .................35 mm
Switching point level:
ON ...........................approx. 520 mm
OFF ...........................approx. 230 mm
Minimum water level
while suctioningn ............................9 cm
Mains cable .................................. 10 m
Weight (incl. accessories) .............. 5.5 kg
(25 mm, 33 mm)
Safety class .......................................... I
Degree of protection .........................IPX8
The maximum performance is measured
with a straight, direct outlet flow. The angle
piece and backflow valve may reduce per-
formance.

Performance data

m
12
9
6
3
0
3000 6000

Notes on Safety

This section deals with the general
safety regulations for working with
the equipment.

Symbols in the manual

Warning symbols with
information on damage
and injury prevention.
Instruction symbols with infor-
mation on preventing dam-
age.
Pull out the mains plug.
Help symbols with informa-
tion on improving tool han-
dling.
9000 12000 15000 18000 21000
discharge rate (l/h)
GB
l/h
19