Remote Control Setup - Sony DIRECTV SAT-HD300 Operating Instructions Manual

8-24. Remote Control Setup

Your DIRECTV ® HD Receiver's remote control can send signals to the HD Receiver in tw o w ays.
Standard IR (Infrared) control allow s the Remote Control to send signals to the HD Receiver
w ithin a line of sight. RF (Radio Frequency) control allow s the remote control to send signals
from outside a cabinet or even from another room w ithin your home. The Remote Control RF
Antenna must be connected to use the RF Remote feature (see section 3-8).
You can also choose to assign one of tw o remote ID's for IR Control or one of sixteen remote
ID's for RF Control. This can be useful if you have more than one Sony satellite receiver in your
home or if local RF signals cause interference to your RF Remote control.
To choose the Remote Control type:
1. Press the M ENU button on the Remote Control to display the on-screen menu.
2. Scroll dow n using "
E " on the remote control.
3. Select the System menu by pressing " " .
4. Scroll dow n to Remote Control using "
E " .
5. Pressing " " . Remote Control Setup Wizard w ill be displayed.
6. If you w ant the process to proceed, follow the instructions in Remote Control Setup Wizard.
7. Press the EXIT button on the remote control to return to TV view ing.
114
Downloaded from: https://www.usersmanualguide.com/