Sony DIRECTV SAT-HD300 Operating Instructions Manual page 72

8. CUSTOM IZATION
8-7. Initializing the System
Step 4. Add Local Netw ork
Adds program information for channels available over the air (terrestrial) in a selected local area as
defined by the satellite service provider. You can select tw o distinct areas by ZIP code to view the
channels being broadcast from both areas. This is useful if you live betw een tw o major broadcast cen-
ters and are capable of receiving signals from both. After this Channel Setup process, the channel list
of over the air stations w ill be added to the guide.
To Add Local Netw ork:
1. If you w ant to add over the air digital and analog channels to your guide, select " YES" .
Note: If you select " NO" , you don't need to do the follow ing process.
2. Press "
show n.
3. If the ZIP code is missing or incorrect, select the ZIP code for your city using "
4. If you w ant to add secondary local channels from another area, enter a secondary ZIP code using the digit
buttons on the remote control and press "
5. Repeat steps 2 to 4.
6. Press "
7. Press "
return to TV view ing.
Note : The Add Local Netw ork feature only adds station and program information to the guide. Depending on
your location, such stations may be received by connecting an antenna to the ANT IN jack (see section 3-4).
If off-air digital and analog channel data is selected " YES" , then some local analog (NTSC) and digital
(ATSC) channels may appear in the GUIDE for w hich reception may be poor or not view able. To hide these
channels, refer to section 8-8 M anaging Channels and section 7-2 Advanced Program Guide™.
71
Downloaded from: https://www.usersmanualguide.com/
" if your ZIP code is correct for the primary local channels. The channel search progress w ill be
" to move to the next step of the initial setup.
" to return to the previous level or press the EXIT button on the remote control if you w ant to
F
" .
E " and pressing " " .