Setup Rotor Data - Correction - Hofmann MC10 HS Operator's Manual

MC10 HS

5.2.13 Setup Rotor Data - Correction

Main menu \ Rotor settings.

Select "Correction" tab.

Enter values or change settings:

Unbalance Display
Indexing offset
Correction mode
Max. number of correc-
tions per step
Correction limit
Max. number of correction
steps
Weight scanning offset
5.2.13.1 Unbalance Display
 Polar correction
 Symmetrical components
Select "Sym. components".

Press "Enter values" key.

Enter number of components.

Enter angle and radius of first component.


The system will calculate all other components.
Accept with "Ok".

Operation
- Editing Rotor Data
Select polar or component cor-
rection
Offset correction position (grip-
per)
with respect to 0°-position
Select type of unbalance cor-
rection
e.g. max. number of drillings per
unbalance correction step.
Correction target in percent of
tolerance.
Entry (0 % - 90 %)
i.e. Tolerance 100gmm
Correction limit 30 %
Correction to 30gmm residual
unbalance
Max. number of unbalance cor-
rection steps.
Angular offset between 0°-posi-
tion and scanning position (for
scanning of sliding weight posi-
tion).
The values should be set the
same for each rotor!
5 - 9