Operation
- Editing Rotor Data
5 - 2
5.2
Editing Rotor Data
Access privileges may have to be activated by
the supervisor.
Expand list of rotors by 100 lines.
Sort list of rotors alphabetically.
5.2.1
Selecting a Rotor
Perform required re-tooling work.
Refer to the machine's Operator's Manual for
further details.
Main Menu \ Rotor Database.
Mark the desired rotor type.
Press the "Select Rotor" key.
Press the "Operation" key.
The measurement display appears.
5.2.2
Creating a New Rotor
Main Menu \ Rotor Database.
Select the non-assigned line.
Press the "New Rotor..." key.
Enter the name of the new rotor and confirm by
pressing "Ok".
INFORMATION
To create a new rotor type, you may also copy and
edit a similar data record. The copied data record is
then saved under a new name.
5.2.3
Copying a Rotor
Main Menu \ Rotor Database.
Mark the rotor, you want to copy.
Press the "Copy Rotor..." key.
Select a free target data record number.
Enter the name of the new rotor and confirm by
pressing "Ok".
Press the "Close" key.
MC10 HS