Command Keys - Hofmann MC10 HS Operator's Manual

MC10 HS
Basic Operation
4.5.4

Command Keys

Name Function
Options Command
Remount Command
"ON":
Zeroing Command
"ON":
Last Reading Command
New part Command
Balance // Command
Run-up / Run-
down
Start Measure Command
Stop Measure Command
- Unbalance Display
Meaning
Open "Settings Polar Dis-
play".
Perform remount balancing
or read last value.
"ON": Unbalance display
with offsetting of zeroing
value.
Zeroing ON / OFF
"ON": Attention! The indica-
ted measurement values are
changed by those deter-
mined with the last zeroing
carried out!
Display last stored measure-
ment value as long as key is
pressed.
Resets the counter to zero.
(Only if the EKS key is inser-
ted and at least the operator
password is active; the ma-
chine must be at a standstill.)
Choice between balancing
(precise measuring method)
and Run-up / Run-down (fast
measuring)
Start measurement run.
Stop measurement run in
Manual Mode. In Automatic
Mode, the measurement run
stops automatically.
4 - 13