Staple Cartridge Replacement And Staple Jam Removal - Oki B8300 User Manual

Staple cartridge replacement and
staple jam removal
When the staple cartridge becomes empty or
staples become jammed, a message will appear
in the message display of the operation panel.
Follow the procedure below to replace the
staple cartridge or remove jammed staples.
1. Open the front cover.
2. Pull out the stapler section.
3. Turn roller rotating knob A in the direction
of the arrow to move the staple unit to the
front. Turn the roller rotating knob until the
triangle mark is aligned with the index.
Roller rotating knob A
Staple unit
4. Remove the empty staple box.
5.
Press the lock button to unlock the staple box
cover and remove the staple cartridge.
If staples remain, the staple cartridge cannot
be removed
6.
After inserting the staple cartridge, press down
on the staple box cover to lock the cartridge in
place. When reinstalling the staple box, push it
in until it clicks into place. Do not remove the
tape from the cartridge before inserting the
staple cartridge into the box.
7.
8.
9.
Make a test print in staple sort mode to ensure
that stapling is performed properly
Saddle stitch finisher — 82
Remove the empty staple cartridge.
Insert a new staple cartridge into the
staple box.
Remove the tape from the staple cartridge
by pulling it straight.
Insert the staple box. When reinstalling
the staple box, push it in until it clicks
into place.
Push the stapler section back into the
finisher. Close the front cover.