Gold Medal Ultra Sixty Pappy's 2656KC Instruction Manual page 5

Ultra Sixty Pappy's
Setup
This unit has been tested at the factory.
1. Remove all packaging and tape prior to operation.
2. Place the unit on a sturdy, level base.
3. The popper unit has 4 glide feet preinstalled at the factory (see image below). Install a
Black Crutch Tip on each of the 4 glide feet. Firmly push the crutch tip over the glide
until it covers the glide entirely.
4. Door knobs are shipped in the accessories pack located inside the machine. Install a
door knob with tee bolt on each popper door; install the knob with screw on the old
maid pan.
5. Carefully install the light bulb (do not over-tighten) into the lamp holder located in the
cabinet interior. Ensure the unit is OFF and unplugged before installing or changing
the bulb (reference the Electrical Requirements section).
6. Mount Timer (use Velcro provided) and Instruction Labels to popper in desired
locations.
Glide (pre-installed
at the factory)
Black Crutch Tip
Model No. 2656KC
Page 5
gmpopcorn.com