Inverter Parameter List; Invalid Parameters When The Fr-A8Ns Is Used - Mitsubishi Electric FR-A8NS Instruction Manual

6.2

Inverter parameter list

The setting of the following parameters is invalid when the
FR-A8NS is installed.
6.2.1 Invalid parameters when the FR-
A8NS is used
Pr.
4 Multi-speed setting (high speed)
5 Multi-speed setting (middle speed)
6 Multi-speed setting (low speed)
15 Jog frequency
16 Jog acceleration/deceleration time
24 Multi-speed setting (speed 4)
25 Multi-speed setting (speed 5)
26 Multi-speed setting (speed 6)
27 Multi-speed setting (speed 7)
28 Multi-speed input compensation selection
44 Second acceleration/deceleration time
45 Second deceleration time
46 Second torque boost
47 Second V/F (base frequency)
48 Second stall prevention operation level
49 Second stall prevention operation frequency
51 Second electronic thermal O/L relay
57 Restart coasting time
58 Restart cushion time
59 Remote function selection
61 Reference current
64
RESTRICTIONS ON THE FUNCTIONS
Name
Pr.
62 Reference value at acceleration
63 Reference value at deceleration
64 Starting frequency for elevator mode
65 Retry selection
67 Number of retries at fault occurrence
68 Retry waiting time
69 Retry count display erase
73 Analog input selection
74 Input filter time constant
79 Operation mode selection
96 Auto tuning setting/status
110 Third acceleration/deceleration time
111 Third deceleration time
112 Third torque boost
113 Third V/F (base frequency)
114 Third stall prevention operation level
115 Third stall prevention operation frequency
125 Terminal 2 frequency setting gain frequency
126 Terminal 4 frequency setting gain frequency
127 PID control automatic switchover frequency
128 PID action selection
129 PID proportional band
130 PID integral time
131 PID upper limit
132 PID lower limit
133 PID action set point
134 PID differential time
135 Electronic bypass sequence selection
Name