Table of Contents
Advertisement
Quick Links
™
FingerChip
Description
Congratulations for choosing FingerChip
™
FingerChip
is the best choice for fingerprint capture. No other technology offers such
a small device with superior capture capabilities at such a low cost.
With the USB or parallel reader FCDEMO4, the user will be able to:
•
Capture a fingerprint image.
•
Evaluate the characteristics of FingerChip
device (500 dpi sensor, 8-bit digital output).
This document describes how to install the device, and provides all electrical and
mechanical schematics. If you have the electronic version of the present document,
you will need the associated CAD files in order to get all the details.
Requirements
•
USB Version FCSWEEP05: one PC running Windows 98
one USB v1.1 compliant port. Note that Windows 2000
V12.00 or later of the accompanying software.
•
EPP Version FCSWEEP04: one PC running Windows 95
(Enhanced Parallel Port) + PS2 port (used only for power supply). Windows 2000
is not supported.
Demonstrator FCDEMO4 USB/EPP
™
technology!
™
technology using the AT77C101B
®
®
/Windows 2000
with
®
is supported from release
®
or later with one EPP
Biometrics
FingerChip
Application Note
®
Rev. 2176A–BIOM–10/02
™
1
Advertisement
Table of Contents
Related Manuals for Atmel FingerChip FCDEMO4
Summary of Contents for Atmel FingerChip FCDEMO4
- Page 1 ™ FingerChip Demonstrator FCDEMO4 USB/EPP Biometrics Description ™ ™ Congratulations for choosing FingerChip technology! FingerChip ™ FingerChip is the best choice for fingerprint capture. No other technology offers such a small device with superior capture capabilities at such a low cost. With the USB or parallel reader FCDEMO4, the user will be able to: Application Note •...
-
Page 2: Main Features
Main Features • Plug and Play ™ • FingerChip Thermal CMOS Sensor AT77C101B • Image Zone: 0.4 x 14 mm = 0.02” x 0.55” • Image Array: 8 x 280 = 2240 Pixels • Pixel Pitch: 50 µm x 50 µm (~500 dpi) •... -
Page 3: Installation
Please follow the instructions described in the installation document on the CDROM. Software Only the acquisition and reconstruction software is provided. Atmel does not directly provide authentication software. Please contact Atmel to get authentication software from one of our Description ™... -
Page 4: Printed Circuit Board
Hardware Note that both the USB and EPP versions use the same printed circuit board and packaging. Only the connector and the bill of materials differ. CAD Files If the user gets the electronic version of this document accompanied by CAD files, he will be able to get detailed information on the mechanical and board specifications. -
Page 5: Electrical Schematics
FCDEMO4 Electrical Click here to see the electronic version. Schematics Figure 2. Electrical Schematics 2176A–BIOM–10/02... - Page 6 ™ Mechanical Note that the most difficult point for the plastic design is located near the FingerChip . The ™ user must ensure that the finger will touch the FingerChip : avoid having the silicon part in a Schematics ™ “hole;”...
- Page 7 FCDEMO4 Click here to see the cover part of the case with Autocad. Click here to see the cover part of the case with Solidworks. Figure 4. Mechanical Schematic 15.80 5.30 6.30 50° 10.76 1.40 0.40 0.40 1.40 1.10 2.85 F (4:1) Click here to see the bottom part of the case with Autocad.
-
Page 8: Part List
RR1, RR2, RR3 BCN16 4A 4 x 220R resistors network 1206 – 2N7002 MOS transistor SOT23 – GL640USB-A parallel/USB interface LQFP 48 GENESYS Fingerchip ATMEL ® Elastomer connector – FUJIPOLY Bottom of the case – – Cover of the case – –... - Page 9 No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.
Need help?
Do you have a question about the FingerChip FCDEMO4 and is the answer not in the manual?
Questions and answers