Related Manuals for Sanus DMF115
Summary of Contents for Sanus DMF115
- Page 1 DMF 115 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/18...
- Page 2 60 lbs. weigh more than Yes — This mount is NOT compatible. (27.2 kg) 60 lbs. (27.2 kg)? Visit decora.sanus.com or call 1-888-333-9952 to fi nd a compatible mount. What is your Drywall with Solid concrete or Unsure? wall made of?
- Page 3 Dimensions NOTE: TV shifts 2.99 in. (7.59 cm) to [cm] the right or left when in the home position. Consider this when selecting the location of your wall mount. [7.6] 15.8 OFFSET [40.0] 11.8 [30.0] 15° [20.0] 15° 15.8 [40.0] [10.0] 11.8 [30.0]...
-
Page 4: Supplied Parts And Hardware
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;... - Page 5 STEP 3 Parts and Hardware STEP 2 Parts and Hardware Locking Screw Wall Plate Template Wall Plate Assembly 1/4-20 x 3/4 in. Additional Parts and Hardware Cable Ties Concrete Installation Kit CMK1 (not included) Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you.
- Page 6 STEP 1 Attach TV Bracket to TV 1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket Based on your TV hole pattern measurements Measure the width and height of your ), determine your TV bracket TV hole pattern in cm. [cm] configuration: A, B, C, D or E.
- Page 7 [cm] [cm] [cm] 40.0 x 30.0 cm 40.0 x 20.0 cm 20.0 x 40.0 cm 15.75 [40.0] 7.87 [20.0] 15.75 [40.0] 11.81 7.87 [30.0] [20.0] 15.75 [40.0] Assemble TV bracket extenders onto Assemble TV bracket extenders onto Assemble TV bracket extenders onto TV bracket and secure using eight...
- Page 8 1.3 Select TV Screw Diameter 1.4 Select TV Screw Length Standard configurations are shown. For special applications, or if you If your TV has a flat back AND you want your TV closer to the Hand thread screws into the threaded inserts are uncertain about your wall, use the shorter screws.
- Page 9 1.5 Attach TV Bracket Position your TV bracket configuration (A, B, C, D or E) over your TV hole pattern - making sure the bracket is centered over the TV hole pattern and level. Secure bracket using your short screw/washer (Flat Back) or long screw/washer/spacer (Round Back / Extra Space) selection. IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
- Page 10 STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) Locate your stud.
- Page 11 Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Install wall plate assembly using two lag bolts and two washers...
- Page 12 STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! Concrete Installation Kit CMK1 is not included (see page 5) Contact Customer Service ● Mount the wall plate assembly directly onto the concrete surface at 1-888-333-9952 to have the additional ●...
- Page 13 Remove the wall plate template and insert three anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit CMK1*). CAUTION: Be sure the anchors are seated flush with the concrete surface. Install wall plate assembly using three lag bolts and three washers (use only the lag bolts and washers from the Concrete Installation Kit* CMK1).
- Page 14 STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. Fold first section of the arm of wall plate assembly against the wall to provide stability. Hang the TV onto the arm of wall plate assembly by first hooking the top support, then resting the TV into place.
-
Page 15: Manage Cables
Manage Cables Cables can be routed through the cable channel on the top of the arm of the wall plate assembly for a cleaner look. Cables ties can be used to secure the cables to the wall plate. Lock the TV to the wall plate assembly with locking screw CAUTION: Route cables around the arm post and through the open area of the... - Page 16 TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. To adjust the leveling of your TV, loosen the locking screw , level your TV, then tighten locking screw If your TV is too loose or too tight, adjust the tilt tension knob by hand. IMPORTANT: This locking screw must be installed to secure NOTE: Once your TV is in place, tighten the tilt tension knob to...
- Page 17 REMOVING THE TV HEAVY! You may need assistance with this step. To remove your TV from the wall plate assembly , disconnect all cables and then reverse the procedures in STEP 3.
- Page 18 Features Fully articulating arm with Adjustments allow fi ngertip control three pivot points, creates of TV or restriction of TV movement optimal viewing position(s) 40.0 30.0 20.0 10.0 15º 20.0 40.0 10.0 TV bracket can be confi gured to fi t TV hole patterns from 7.5 x 7.5 cm Cable channel Level...
- Page 20 ¿Su televisor pesa más de 27.2 kg No — ¡Perfecto! 27.2 kg (60 lb), incluidos Sí — Este soporte NO es compatible. decora.sanus.com Visite o llame al 1-888-333-9952 los accesorios? (60 lb) (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.
Need help?
Do you have a question about the DMF115 and is the answer not in the manual?
Questions and answers