Table of Contents
Advertisement
10.5 Spare parts
For a list of spare parts, see spare parts list in MTpro, 3 842 539 057
(download: www.boschrexroth.com/mtpro).
11 Decommissioning
This product does not need to be decommissioned. Accordingly, this section has
been left blank.
12 Disassembly and replacement
High electrical voltage!
Risk of serious injury or death from electric shock.
Disconnect the relevant system component before performing maintenance
or repair work.
Secure the system against being unintentionally switched on again.
High pneumatic pressure!
Risk of serious injury or death.
Switch off the compressed air supply to the relevant system component before
performing any maintenance or repair work.
Secure the system against being unintentionally switched on again.
Suspended loads can fall!
Falling objects can result in serious injury (or even death).
Only use slings with a suffi ciently high bearing load capacity (see delivery
documents for the product weight).
Make sure the lifting straps are correctly fastened before lifting the product.
Secure the product against tipping when lifting.
Make sure that no one but the operator is in the danger zone during lifting
and lowering.
12.1 Preparing the product for storage/later use
• Only set the product down on a fl at surface.
• Protect the product from mechanical infl uences.
• Protect the product from environmental infl uences, such as dirt and moisture.
• Observe the ambient conditions, see page 51.
• For products with a mounted motor: support the product so that the motor is not
placed under mechanical load.
13 Disposal
• The materials used are environmentally friendly.
Decommissioning
WARNING
3 842 558 372/2021-10, MIT: EL 2, Bosch Rexroth AG
49/56
Advertisement
Table of Contents
