Configure the IP Address for the Management VLAN
Log in to the management console, connect to the device, and follow these steps.
1. Assign a name, IP address, and default subnetwork mask for the VLAN as shown in the following
example.
configure vlan vlan_name ipaddress nn.nn.nn.nn 255.255.255.0
Your changes take effect immediately.
2. Enter save to save your configuration changes so that they will be in effect after the next system
reboot.
The configuration is saved to the configuration database of the switch.
48
9920 Network Packet Broker Hardware Installation Guide
Activate and Verify the Extreme 9920