Table of Contents
Advertisement
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the
server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
IP
Address,
Subnet
Mask,
Gateway
and DNS
How to set up manually
1
Set
Network Type
to
Wireless
from the
Open Network Settings
2
The
Network
function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the u or d button to select a network, and then press the E button
twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
The
Add Network
button appears.
4
If the
Enter the password for (AP Name).
that does not have security, go to step 7.
5
If the router has security, enter the
Enter the password for (AP Name).
6
When done, use the right arrow button to move the cursor to Done, and then press E. The network
connection screen appears and the verification process starts.
7
Select
Cancel
while network connections are being attempted. This will stop the connection.
8
Select
IP Settings
on network connection screen. The
9
Select the field at the top, press E, and then set
process for each field in the
IP
Address.
― Setting
IP setting
to
Enter manually
automatically changes
10
When done, select
OK
at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
11
When the connection has been verified, the
have any problems using online services, please contact your Internet service
appears.
page.
Refresh
to search again.
Stop
button.
screen appears, go to step 5. If you select a wireless router
(Security key or PIN).
IP Settings
screen appears.
IP setting
to
Enter
manually. Repeat the entry
DNS setting
to
Enter
manually.
"Success! Your device is connected to the Internet. If you
provider." message
74
Advertisement
Table of Contents
