Power Control; Auto Power On; Max. Power Saving; Standby Control - Samsung DB10E-POE User Manual

Power Control

MENU m → System → Power Control → ENTER E
Power Control

Auto Power On

Max. Power Saving

Standby Control

Power Button

Power on only

Network Standby

- The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Off
•
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
Off
Standby Control
On
On
You can set the screen standby mode to be applied when an input signal is received.
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message
Off
Off
•
The message
― If
― If
On
•
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
Power on
•
Power on and
•
Network Standby
This feature keeps the network power on when the product turns off.
Off
•
/ On
No Signal
will appear if no source device is connected.
No Signal will appear if no input signals are detected.
No Signal is displayed although a source device is connected, check the cable connection.
No Signal Message is set to Off, the No Signal
No Signal Message to On.
If this is the case, set
only: Set the power button to turn on the power.
off: Set the power button to turn on/off the power.
On
/
message does not appear.
123