Table of Contents
Advertisement
Set the network connection to use Internet services such as perform software upgrades.
Automatic Open Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Set
Network Type
to
Wired
from the
Open Network Settings
― For wired models, select
Network Status
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the
have any problems using online services, please contact your Internet service
appears.
― If the connection process fails, check the LAN port connection.
― If the automatic process cannot find the network connection values or if you want to set the connection
manually, go to the next section(Manual Open Network Settings (Wired)).
Manual Open Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the
server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
― The path to the settings depends on the installed OS.
page.
menu.
"Success! Your device is connected to the Internet. If you
provider." message
IP
Address,
Subnet
Mask,
Gateway
How to set up manually
1
Set
Network Type
2
The network test screen appears and the verification process starts. Press Cancel. The verification
process stops.
― For wired models, select
3
Select
IP Settings
4
Select the field at the top, press E, and then set
process for each field in the
― Setting
IP setting
to
5
When done, select
appears and the verification process starts.
6
When the connection has been verified, the
have any problems using online services, please contact your Internet service
appears.
and DNS
to
Wired
from the
Open Network Settings
page.
Network Status
menu.
on network connection screen. The
IP Settings
IP setting
to
IP
Address.
Enter manually
automatically changes
DNS setting
OK
at the bottom of the page, and then press E. The network test screen
"Success! Your device is connected to the Internet. If you
screen appears.
Enter
manually. Repeat the entry
to
Enter
manually.
provider." message
72
Advertisement
Table of Contents
