Table of Contents
Advertisement
• connect the power cable to the switch disconnector of the
machine;
• activate all the contactors by turning clockwise the con-
tactor knob from position "O" to "I";
IMPORTANT
Make sure to close the door of the electric box,
firmly at the end of the installation.
NOTE!
For additional information, refer to the wiring
diagram, supplied with the equipment.
E.19 Fitting curtains
With the machine switched off and cold, fit or refit the curtains
as illustrated below.
Machine curtains position
44" - 150 racks/hour - left to right
44" - 150 racks/hour - right to left
66" - 200 racks/hour - left to right
66" - 200 racks/hour - right to left
* Only for ESD models without dryer module
25
Advertisement
Table of Contents
