Table of Contents
Advertisement
Legend (cont'd.)
F
Power supply
• 0 = Electric
G
Drying module
• 0 = none
• 1 = Medium
• 2 = Large
• 3 = Corner 90°
CAUTION
For all the additional modules installed
later. make sure that the power cable
supply is properly sized.
B.6
Responsibility
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the original manufacturer
warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and / or untrained
personnel;
C
TECHNICAL DATA
C.1
Main technical characteristics
Common
Power supply voltage
Frequency
Power cable
Switch disconnector
Supply water pressure
Hot water supply temp.
Cold water supply temp.
Concentration of chlorides in water
Supply water hardness
Electric conductivity of water
Protection rating
Nr. wash speeds
1.
For models with prewash module installed.
2.
Hot water temperature recommended for high power models.
3.
Cold water temperature recommended for models with ESD.
Machine
Model
Capacity wash at speed 3
Water consumption
V
Hz
Type
A
bar [kPa]
℃
℃
ppm
°f/°d/°e
µS/cm
44" - 150 racks/hour
racks/h
150
l/h
180
l/basket
1.2
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
The Manufacturer declines any liability for inaccuracies con-
tained in the manual, if due to printing or translation errors.
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
an integral part of the manual and therefore must be kept
together with it.
B.7
Copyright
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional company.
B.8
Keeping the manual
The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or
leasing.
B.9
Recipients of the manual
This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• specialised personnel - Customer Care service (see service
manual).
400V 3~
440V 3~
50 Hz
60 Hz
H07RN-F
125A 3P+N for 400V 3~ / 440V 3~
1.5 bar [150 kPa]...6 bar [600 kPa]
2 bar [200 kPa]...6 bar [600 kPa]
50
2
60
3
15
<20
14/8/10
<400
IPX5
3
66" - 200 racks/hour
200
180
0.9
1
15
Advertisement
Table of Contents
