Table of Contents
Advertisement
A.9
Service
• Only original spare parts can ensure the safety standards of the appliance.
A.10
Disposal of packing
• Dispose of each packaging items respecting the current regulation in the country of
installation.
A.11
Machine disposal
• Work on the electrical equipment must only be carried out by a specialised personnel,
with the power supply disconnected.
• Dismantling operations must be carried out by specialised personnel.
• Make the appliance unusable by removing the power cable and any compartment
closing devices, to prevent the possibility of someone becoming trapped inside.
• Refer to "A.3 Personal protection equipment" for suitable personal protection equipment.
• When scrapping the machine, the "CE" marking, this manual and other documents
concerning the appliance must be destroyed.
IMPORTANT
Save these instructions carefully for further consultation by the various
operators.
B
GENERAL INFORMATION
B.1
Introduction
Given below is some information regarding the intended use of
this appliance, its testing, and a description of the symbols
used (that identifies the type of warning), the definitions of
terms used in the manual and useful information for the
appliance user.
B.2
Definitions
Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator
machine installation, adjustment, use,
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer
Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for
an operator who has been informed and
normal
trained regarding the tasks and hazards
machine use
involved in normal machine use.
Customer
an operator instructed/trained by the
Care service
Manufacturer and who, based on his
or specialised
professional and specific training, experi-
technician
ence and knowledge of the accident-
prevention regulations, is able to appraise
the operations to be carried out on the
machine and recognise and prevent any
risks. His professionalism covers the
mechanical, electrotechnical and elec-
tronics fields.
Danger
source of possible injury or harm to health.
Hazardous
any situation where an operator is
situation
exposed to one or more hazards.
Risk
a combination of probabilities and risks of
injury or harm to health in a hazardous
situation.
Protection
safety measures consisting of the use of
devices
specific technical means (guards and
safety devices) for protecting operators
against risks.
Guard
an element of a machine used in a specific
way to provide protection by means of a
physical barrier.
Safety device
a device (other than a guard) that elimi-
nates or reduces the risk; it can be used
alone or in combination with a guard.
Customer
the person who purchased the machine
and/or who manages and uses it (e. g.
company, entrepreneur, firm).
Emergency
a group of components intended for the
stop device
emergency stop function; the device is
activated with a single action and pre-
vents or reduces damage to persons/
machines/property/animals.
Electrocution
an accidental discharge of electric current
on a human body.
B.3
Machine and manufacturer's
identification data
An example of the marking or data plate on the machine is
given below:
ELX
Made in EU
F.Mod.
PNC
EL
V
Type ref.
IPX5
Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy)
The data plate gives the product identification and technical
data. The meaning of the various information given on it is
listed below:
F.Mod.
factory description of product
Comm.Model
commercial description
PNC
production number code
Ser.Nr.
serial number
2017
Comm.Model
Ser.Nr.
50 Hz
kW
13
Advertisement
Table of Contents
