Table of Contents
Advertisement
The data plate is located on the front panel of the equipment.
ELX
F.Mod.
PNC
EL
Electrolux Professional spa - Viale Treviso, 15 - 33170 Pordenone (Italy)
Fig. 1 Data plate position
IMPORTANT
When installing the machine, make sure the
electrical connection is carried out in compliance
with that specified on the data plate.
NOTE!
Refer to the data given on the machine's data plate
for relations with the Manufacturer (e.g. when
ordering spare parts, etc.).
D.4
Additional indications
The drawings and diagrams given in the manual are not in
scale. They supplement the written information with an outline,
but are not intended to be a detailed representation of the
machine supplied
The numerical values given on the machine installation
diagrams refer to measurements in millimeters and/or inches.
Due to its size, the machine is sometimes shown schematically
divided into its functional modules in order to provide a
complete view.
D.4.1
How to interpret the factory description
The factory description on the data plate has the following
meaning:
(1)
(2)
(3)
E
SR
10
Z
SR
10
V
SR
10
Description
(1)
Brand
(2)
Machine Type
(3)
Racks/hour
E
NORMAL USE
E.1
Correct use
Our machines are designed and optimized in order to obtain
high performance and efficiency.
This equipment must only be used for its expressly designed
purpose, i. e. washing dishes with water and specific deter-
gents. Any other use is to be deemed improper.
Made in EU
2017
Comm.Model
Ser.Nr.
V
50 Hz
kW
IPX5
(4)
(5)
E
5
E
5
E
6
Possible variables
E = Electrolux; Z = Zanussi; V
= Veetsan
SR = Single rinse
10 = 100 r/h
Description
(4)
Supply
(5)
Frequency
D.5
Responsibility
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-original
spare parts and accessories can negatively affect machine
operation and invalidates the original manufacturer
warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and / or untrained
personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the user
or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and suitable
personal protection equipment to be worn by operators, in
compliance with regulations in force in the country of use.
The Manufacturer declines any liability for inaccuracies con-
tained in the manual, if due to printing or translation errors.
Any supplements to the installation, use and maintenance
manual the Customer receives from the Manufacturer will form
an integral part of the manual and therefore must be kept
together with it.
D.6
Copyright
This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SpA.
D.7
Keeping the manual
The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or
leasing.
D.8
Recipients of the manual
This manual is intended for:
• the employer of machine users and the workplace manager
• operators for normal machine use
• specialised technicians - Customer Care service (see
service manual).
E.2
Characteristics of personnel enabled to
operate on the machine
The Customer is responsible for ensuring that persons
assigned to the various duties:
• read and understand the manual;
• receive adequate training and instruction for their duties in
order to perform them safely;
• receive specific training for correct machine use.
Possible variables
E = Electric
5 = 50 Hz; 6 = 60 Hz
11
Advertisement
Table of Contents
