Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-SIT2S
Summary of Contents for Vivo STAND-SIT2S
- Page 1 Sit-Stand Desk Mount Instruction Manual SKU: STAND-SIT2S Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-sit2s help@vivo-us.com www.vivo-us.com 1-800-371-5654...
- Page 2 TOOLS NEEDED WARNING! DO NOT EXCEED WEIGHT CAPACITY. 13.2 lbs 4.4 lbs Failure to do so may result in serious injury. (6 kg) (2 kg) If you do not understand these directions, or if you have any doubts about the safety of the PER ARM TRAY installation, please call a qualified technician.
- Page 3 STEP 2 STEP 6 For flat back monitors, attach VESA plates using 12mm screws (M-A or M-B) with washers Remove knobs and slide VESA plates off from brackets. Set parts aside for later use. (M-E). For curved or recessed back monitors, use 16mm screws (M-C or M-D) with washers (M-E) and spacers (M-F).
- Page 4 STEP 9 STEP 12 Adjust height of monitors using knob on back of pole Insert cables making sure there is enough slack for full movement, then re-install covers. (B). Correct individual monitor height by turning the knob on each monitor bracket as shown. Use 6mm Allen wrench (M) if knobs are too stiff to turn by hand.
- Page 5 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
Need help?
Do you have a question about the STAND-SIT2S and is the answer not in the manual?
Questions and answers