Atlas Copco 4220 4522 82 Product Instructions

Operator handle

Printed Matter No. 9836 7130 00

Valid from Serial No. A5380001

2013-02-01

Operator handle

Read all safety warnings and instructions

Failure to follow the safety warnings and in-

structions may result in electric shock, fire and/

or serious injury.

Save all warnings and instructions for future

reference

Operator handle

4220 4522 82

WARNING

Electric pistol grip nutrunner

Product Instructions

Table of Contents

Need help?

Do you have a question about the 4220 4522 82 and is the answer not in the manual?

Page 1 Electric pistol grip nutrunner Valid from Serial No. A5380001 Product Instructions 2013-02-01 Operator handle 4220 4522 82 WARNING Read all safety warnings and instructions Failure to follow the safety warnings and in- structions may result in electric shock, fire and/ or serious injury.
Page 3 9. Put the protective cover back in position. Loosen the screw in front of the tringular holder and adjust the handle to optional position. Tighten the screw at recommended torque. © Atlas Copco Industrial Technique AB - 9836 713000 00...
Page 4 Instruction supplement Operator handle Configuring the operator handle © Atlas Copco Industrial Technique AB - 9836 713000 00...
Page 5 10. Press Store to store all selected values in memory. The safety trigger is now activated on the tool. For more information of the Power Focus controller, see the applicable user guide. © Atlas Copco Industrial Technique AB - 9836 713000 00...
Page 8 Original Product Information Atlas Copco Industrial © Copyright 2012, Atlas Copco Industrial Technique AB. All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This Technique AB applies in particular to trademarks, model denominations, part numbers and SE-10523 STOCKHOLM drawings.