Table of Contents
Advertisement
• COMPRESSOR OVERLOAD / OVERHEAT PROTECTION
If the compressor overheats or overloads due to high or low voltage or high ambient temperature,
the built in safety protection for the compressor will start working and turn off the unit.
NOTIFICATION
When the overload protection is working, the air flow from the unit will be at the ambient temperature
of the room, but will not cool the air.
If overload protection works frequently, find out, and fix the problem before using the unit.
• ADJUSTING THE AIR FLOW DIRECTION.
Please adjust the duct to get the desired cooling direction. The cooling duct adjustment range is 360°
horizontal and 50° vertical.
NOTIFICATION
Please adjust the angle of the cooling duct before using the unit. Hold the curved duct and bend the
cooling duct for angle adjustment.
• KEEP DISTANCE
Make sure the unit has minimum distance from any wall, ceiling, or object as illustrated below.
In order to prevent accidents, the unit should be placed on level ground. Unlevel ground, stairs,
emergency exits should not be used.
Minimum distance needed is 12" from any wall. While the unit operates, please do not place
obstructions in front of the filter, cooling, or heating exhaust duct.
Heating Outlet
Direction above 16"
360°
KoolBase
9
Cooling Outlet
Direction above 12"
Air Intake
Direction above 8"
Advertisement
Table of Contents
