Wireless Antennas (Disconnect And Connect) - Bang & Olufsen BeoLab 17 Service Manual

4.24 Replacement of modules

Wireless Antennas (disconnect and connect)

Disconnecting Wireless Antennas
- Disconnect antenna wire with the special tool,
Extraction jig, U.FL series. Pull gently
perpendicular to the PCB89 via the chain.
! When disconnecting antenna wires be careful
not to damage the antenna plug or wire.
Connecting Wireless Antennas
- Connect antenna wire by placing the
wire connector in correct position on top of PCB
connector and press gently until it snap in.
! When connecting antenna wires be careful not
to damage the antenna plug or wire.
Correct position