Software Update - Bang & Olufsen BeoLab 17 Service Manual

3.6 Adjustments

Software update

Approach
It is very important that the product is updated to the latest software version
before it is returned to the customer. This is to ensure the customer receives the
best possible experience. Follow the procedure below:
Connect a service PC with ServiceTool. Follow the procedure below:
- Connect the ServiceTool hardware from the service connector on the product to
the service PC as shown:
- Run ServiceTool.
- Be sure that ServiceTool is updated to the latest version. If not, upgrade and restart
ServiceTool.
- Scroll down to BeoLab section.
- Select BeoLab 17 and click Launch.
- Click on the PRODUCT tab (if not already shown).
- Click + next to each item to expand the menus.
- Click Software -> Automatic Software Update
- Follow the procedure in ServiceTool.