Information; Pcb30, Digital Sound Engine; Pcb35, Amplifier; Pcb89, Wireless Power Link Rx - When Backup Function Is Possible - Bang & Olufsen BeoLab 17 Service Manual

3.2 Adjustments
Adjustments

Information

Depending on the repair there might be different kinds of adjustments/alignment
to be performed, after maintenance of the product.
Some adjustments has to be done with ServiceTool.
Adjustments or calibration is necessary when the following modules are replaced:
PCB30, Digital Sound Engine - when backup function is possible:
- Restore product data from the data backup
- Calibration of the amplifier (done automatically)
PCB30, Digital Sound Engine - when backup function is not possible:
- Restore product data from factory data (ID Restore)
- Calibration of the amplifier (done automatically)

PCB35, Amplifier:

- Calibration of the amplifier

PCB89, Wireless Power Link Rx - when backup function is possible:

- Restore product data from the data backup
- Connecting speaker wirelessly

PCB89, Wireless Power Link Rx - when backup function is not possible:

- Restore PCB89, Wireless Power Link Rx data
- Connecting speaker wirelessly
Speaker units:
- Calibration of speaker units