Replace PCB89, Wireless Power Link Rx
☞ 4.2 Remove cover
☞ 4.3 BeoLab 17 in service position 1
☞ 4.14 Remove PCB30, Digital Sound Engine
- Remove screws and gently pull off PCB89,
Wireless Power Link Rx
! Attention antenna wires
- Disconnect antenna wires with the special tool,
Extraction jig, U.FL series and replace PCB89,
Wireless Power Link Rx
! When disconnecting antenna wires be careful
not to damage the antenna plug or wire, see
page 4.24
8mm
2x
TX10
89J14
89J13
89J11
Replacement of modules
4.19