Page 1
Quick Installation Guide This document will guide you through the basic installation process for your new D-Link Nuclias Cloud Router DBG-2000...
1.Flash Disk or Hard Disk for This guide gives step by step instructions for network sharing. setting up D-Link DBG-2000. Please note that the 2.Printer (It will be supported by future firmware upgrade) model you have purchased may appear slightly different from those shown in the illustrations.
Interface Web-Based DHCP Interface Type IP Address Management Client To power on the DBG-2000 device, press the DC Static IP 192.168.10.1 Enabled Enabled LAN(1-4) / power switch on the rear panel to the on position. WLAN To power off the device, press the power switch to DHCP 0.0.0.0...
Page 4
Initially Configure the Device Using a Console Connection (RJ45-to-DB9 DCE) The software is preinstalled on the DBG-2000 device. When the device is powered on, it is ready The DBG-2000 provides an serial port that to be configured. While the device has a default...
Need help?
Do you have a question about the DBG-2000 and is the answer not in the manual?
Questions and answers