Accessories - Culligan 60K Installation, Operation, And Service Instructions With Parts Lists

Accessories

Ported Plumbing Adapter
The ported plumbing adapter is installed onto the valve the same way as the standard plumbing adapter.
See page 13 for instructions.
Gauge and Sample Valve Kit (P/N 01029507)
This kit requires the use of a ported plumbing adapter (see above), 1/4" tubing (P/N 00303177 (1' blue)
or 00402184 (1' black) and two 1/4" PI x 1/4" NPTE adapters (not provided). The gauge kit can be mounted
on the wall, on the piping or using the L-bracket it can be mounted under the GBE controller. (hardware is not included)
1/4" Tubing to
inlet or outlet
of ported
plumbing
adapter.
36 Culligan® Top Mount (CTM) Water Softeners
Figure 41.
1/4" NPT Internal Threads
Figure 42.
1.5"
.
NOTE!
Ports can be positioned upwards for
gauges or downwards for sample valves.
CAUTION!
Do not over tighten fittings in the port
adapter. Over tightening can damage
the ports causing them to leak.
1.5" or 2" Threads
1/4" Tubing to inlet
or outlet of ported
plumbing adapter
Connect to
the gauge kit.
Connect to the
bottom of the
GBE controller.
L Bracket
36 Cat. No. 01029401