Culligan 60K Installation, Operation, And Service Instructions With Parts Lists page 42

4. Insert non-hardwater bypass plug on
top of the hardwater bypass piston.
5. Make sure all the coupling o-rings are fully inserted into the manifold.
6. Screw manifold back onto the valve body. Be careful not to pinch any of the o-rings
7. Screw the cover onto the manifold. (16 screws)
8. Reconnect the tubing (see
42 Culligan® Top Mount (CTM) Water Softeners
Figure 51.
Figure 52.
page 23).
Proper
position of
non-hardwater
bypass plug
42 Cat. No. 01029401